 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IN74AC32 QUAD 2-INPUT OR GATE High-Speed Silicon-Gate CMOS The IN74AC32 is identical in pinout to the LS/ALS32, HC/HCT32. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 A; 0.1 A @ 25C High Noise Immunity Characteristic of CMOS Devices Outputs Source/Sink 24 mA ORDERING INFORMATION IN74AC32N Plastic IN74AC32D SOIC TA = -40 to 85 C for all packages LOGIC DIAGRAM PIN ASSIGNMENT * * * * * PIN 14 =VCC PIN 7 = GND FUNCTION TABLE Inputs Output A B Y L L L L H H H L H H H H 1 IN74AC32 MAXIMUM RATINGS* Symbol Parameter Value Unit VCC DC Supply Voltage (Referenced to GND) -0.5 to +7.0 V VIN DC Input Voltage (Referenced to GND) -0.5 to VCC +0.5 V VOUT DC Output Voltage (Referenced to GND) -0.5 to VCC +0.5 V IIN DC Input Current, per Pin mA 20 IOUT DC Output Sink/Source Current, per Pin mA 50 ICC DC Supply Current, VCC and GND Pins mA 50 PD Power Dissipation in Still Air, Plastic DIP+ 750 mW SOIC Package+ 500 Tstg Storage Temperature -65 to +150 C 260 TL Lead Temperature, 1 mm from Case for 10 C Seconds (Plastic DIP or SOIC Package) * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. +Derating - Plastic DIP: - 10 mW/C from 65 to 125C SOIC Package: : - 7 mW/C from 65 to 125C RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC DC Supply Voltage (Referenced to GND) VIN, VOUT DC Input Voltage, Output Voltage (Referenced to GND) TJ Junction Temperature (PDIP) TA Operating Temperature, All Package Types IOH Output Current - High IOL Output Current - Low t r, tf Input Rise and Fall Time * VCC =3.0 V VCC =4.5 V (except Schmitt Inputs) VCC =5.5 V * VIN from 30% to 70% VCC Min 2.0 0 Max 6.0 VCC 140 +85 -24 24 150 40 25 Unit V V C C mA mA ns/V -40 0 0 0 This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or VOUT)VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open. 2 IN74AC32 DC ELECTRICAL CHARACTERISTICS(Voltages Referenced to GND) Guaranteed VCC Limits Symbol Parameter Test Conditions V 25 C -40C to 85C 2.1 2.1 VIH Minimum High- VOUT= VCC-0.1 V 3.0 3.15 3.15 Level Input 4.5 3.85 3.85 Voltage 5.5 0.9 0.9 VIL Maximum Low - VOUT=0.1 V or VCC-0.1 V 3.0 1.35 1.35 Level Input 4.5 1.65 1.65 Voltage 5.5 2.9 2.9 VOH Minimum High- IOUT -50 A 3.0 4.4 4.4 Level Output 4.5 5.4 5.4 Voltage 5.5 * VIN=VIH or VIL 2.46 2.56 IOH=-12 mA 3.0 3.76 3.86 IOH=-24 mA 4.5 4.76 4.86 5.5 IOH=-24 mA 0.1 0.1 VOL Maximum Low- IOUT 50 A 3.0 0.1 0.1 Level Output 4.5 0.1 0.1 Voltage 5.5 * VIN=VIL 0.44 0.36 IOL=12 mA 3.0 0.44 0.36 IOL=24 mA 4.5 0.44 0.36 5.5 IOL=24 mA IIN Maximum Input VIN=VCC or GND 5.5 0.1 1.0 Leakage Current VOLD=1.65 V Max IOLD +Minimum 5.5 75 Dynamic Output Current VOHD=3.85 V Min IOHD +Minimum 5.5 -75 Dynamic Output Current VIN=VCC or GND ICC Maximum 5.5 4.0 40 Quiescent Supply Current (per Package) * All outputs loaded; thresholds on input associated with output under test. +Maximum test duration 2.0 ms, one output loaded at a time. Note: IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective VCC Unit V V V V A mA mA A limit @ 5.5 V 3 IN74AC32 AC ELECTRICAL CHARACTERISTICS(CL=50pF,Input tr=tf=3.0 ns) VCC Guaranteed Limits * Symbol Parameter V 25 C Min 1.5 1.5 1.5 1.5 Max 9.0 7.5 8.5 7.0 4.5 tPLH tPHL CIN Propagation Delay, Input A or B to Output Y (Figure 1) Propagation Delay, Input A or B to Output Y (Figure 1) Maximum Input Capacitance 3.3 5.0 3.3 5.0 5.0 -40C to 85C Min Max 1.5 10.0 1.0 8.5 1.0 9.0 1.0 7.5 4.5 Unit ns ns pF CPD Power Dissipation Capacitance * Voltage Range 3.3 V is 3.3 V 0.3 V Voltage Range 5.0 V is 5.0 V 0.5 V Typical @25C,VCC=5.0 V 20 pF Figure 1. Switching Waveforms 4 |
Price & Availability of IN74AC32
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |